Effect of rapid Solidification on mechanical properties of free machining lead free aluminum alloys for improved machinability

Authors

  • Nermin Ali Abdelhakim PHD student ,Metal Physics Laboratory, Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt.
  • Rizk Mostafa Shalaby Metal Physics Laboratory, Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt, P.O.Box: 35516.
  • Mustafa Kamal Metal Physics Laboratory, Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt, P.O.Box: 35516.

DOI:

https://doi.org/10.24297/jap.v13i10.6436

Keywords:

free machining alloys, rapid solidification, microstructure, mechanical properties

Abstract

There have been very few reports describing the free machining lead free aluminum alloys containing minimal amounts of tin and indium melt spun process. Our paper describes the effect of fundamental factors on the machinability of free machining lead free aluminum alloys rapidly solidified from melt. Structural and thermal properties have been investigated by x-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. Tensile test machine used in studies the mechanical properties such as ultimate tensile strength, elastic constants, yield strength and critical shear stress for Al-Zn-Sn-In alloys. It is noticed that mechanical and thermal properties attributed to fine grained structure, reduced levels of segregation and presence of new intermetallic compounds (IMC) such as AlZn and SnZn due to high casting rate by rapid solidification processes. The determination of mechanical properties was suggested to be attributed to the gradual increase of α-Al crystals. We evaluated the tensile properties using tensile test machine of the melt-spun ribbons at varied stress-strain rates to determine the underlying deformation mechanisms .Critical shear stress (CSS) was also calculated .It was found that it is equal to 9.29 GPa for annealed ribbons at 262 0C for 9 hrs. The results showed that several combination of tensile strength ,yield strength ,elastic moduli can be generated from Al- 0.1wt% Zn-1.5 wt% Sn- 1.63 wt% In alloys before and after heat treatment at (262 0C for 3,6,9 hrs) to meet the needs of free machining aluminum alloy applications.                                                                        

Downloads

Download data is not yet available.

References

[1] machining and machinability of alluminium alloys v.songmene , R.khettabi , I.Zaghbani , J.Kouom and A.Djebara ,E`cole de technologie supe`rieure (E`TS), department of mechanical engineering ,1100 Notre-Dame street west , montreal Quebec H3C 1K3 ,Canada , WWW.intecho(en.com),377-400.
[2] Bothroyd, G., fundamentals of machining and machine tools, scripta book co. , Washington , DC , (1975).
[3] free –cutting alluminium alloy ,with Sn as substitution for lead ,S.Koch and H.Antrekowitsch ,278-281 , BHM, 153.Jg. (2008) Heft 7.
[4] Smolej,A. , B.Bresk Var , M.Sokovis , V.Dragojevic ,E.Slacck and T.Smoral , properties of alluminium free-cutting alloys within , part 1 . Alluminium 78 (2002) 4 , 284-288.
[5] Johne , D. , handbuch der alluminium zerspanung , alluminuim-verlag , DÏ‹sseldorf (1984).
[6] Sircar and S.Subhasish ,free machining alluminium alloy containing bismuth or bismuth-tin for free machining and a method of use,Reynolds metal company,Richmond,VA,US patent no 6 409 966,(2002).
[7] Zoller , H. ,G.Enzler and J.C.Fornerod , Ï‹ber die zerspanbarkeit von alluminium legieerungen , alluminium 45 (1969) 1 , 49-54 .
[8] Johne , P. , sparen von alluminium wek-sotoffen , alluminium 56(1980)6 , 413-417 .
[9] Trend , E.M., and R.K.Wright ,metal cutting –fourth edition , Batterworth Hiene –man , Woburn (2000).
[10] Edwards , B.J., and G.D.ScoH , alcoa`s ultra-alloy 6020, A lead free alluminium alloy with A-rated machinability ideal suited for precision machined parts . Alcoa (2004).
[11] R.J. M. Kamal, J. c. Pieri, Memories et Etudes scientifiqes Revue de Metallurgie-Mars, (1983) 143–148.
[12] Y.H.Zhu,Mater.Trans.45 , 3038 (2004).
[13] Y.A.GELLER and A.G.RAKHSHTADT, "Science of materials",Sci.Mater , vol.138 ,pp.138-141 ,1977.
[14] P. Duwez, R.H. Willens, W. Klement, Continuous Series of Metastable Solid Solutions in Silver-Copper Alloys, J. Appl. Phys. 31 (1960) 1136.
[15] A.J. R. Manaila, F. Zavaliche, R. Popescu, D. Macovei, A. Devenyi, C. Bunescu, E. Vasile, No Title, Mater. Sci. Eng. A 226-228 (1997) 290–295.
[16] F.Q.Zu , Z.G.Zhu , B.Zhang , Y.Fengand and J.P.Schui , J.Phys. condens.matter 13(2001) 11435-11442.
[17] M.Yan ,W.Z.Zhu , B.Cantor , the microstructure of as-melt spun Al-7% Si-0.3% Mg alloy and its variation , continuous heat treatment , mater, Sci , Eng, A. , 284 (2000) ,77-83.
[18] O.Uzun , T.Karaaslan , M.Gogebakan , M.Keshin , Hardness and microstructural characteristics of rapidly solidified Al-8-16wt% Si alloy , J. , alloys comp. , 376 (2004), 149-157.

Downloads

Published

2017-11-22

How to Cite

Abdelhakim, N. A., Shalaby, R. M., & Kamal, M. (2017). Effect of rapid Solidification on mechanical properties of free machining lead free aluminum alloys for improved machinability. JOURNAL OF ADVANCES IN PHYSICS, 13(10), 5155–5166. https://doi.org/10.24297/jap.v13i10.6436

Issue

Vol. 13 No. 10 (2017)

Section

Articles

License

Creative Commons License All articles published in Journal of Advances in Linguistics are licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

1 2 > >>