Composantes de joint de soudage par fusion

Authors

  • A. NAIT SALAH Hassan First University of Settat, Morocco
  • M. KADDAMI Hassan First University of Settat, Morocco

DOI:

https://doi.org/10.24297/jap.v18i.8780

Keywords:

TTAS, ZF, ZAT, AWS, Joint de soudage

Abstract

The purpose of this article is to review the basic principles governing the evolution of the composition of the welding joint. The susceptibility to cracking of welded structures is a function of the microstructure, the environment, and the stresses applied; it is essential to understand the basic principles of the composition and evolution of the microstructure during welding. This article will focus primarily on fusion welding.

Downloads

Download data is not yet available.

Author Biographies

A. NAIT SALAH, Hassan First University of Settat, Morocco

Laboratory “Physical Chemistry of Processes and Materials” Faculty of Science and Technology

M. KADDAMI, Hassan First University of Settat, Morocco

Laboratory “Physical Chemistry of Processes and Materials” Faculty of Science and Technology

References

John C. lippold. Welding Metallurgy and Weldability. 2015 John Wiley &Sons, Inc.

Kou S. Welding Metallurgy. 2nd ed. Hoboken nJ: John Wiley and Sons, inc.; 2003. 176.

Easterling K. Introduction to the Physical Metallurgy of Welding. London: Butterworths and Co.; 1983. 73.

Nippes EF. The weld heat-affected zone. Weld J 1959;38 (1):1s–17s.

Savage WF, nippes EF, Szekeres ES. A study of weld interface phenomena in low alloy steel. Weld J 1976;55 (9):260s–268s.

BY C. RODRÍGUEZ, J. GARCÍA CABEZAS, E. CÁRDENAS, F. J. BELZUNCE, AND C. BETEGÓN Mechanical Properties Characterization of Heat-Affected Zone Using the Small Punch Test 192-s SEPTEMBER 2009, VOL. 88

Miguel Lozano, Miguel A. Serrano * ID, Carlos López-Colina ID, Fernando L. Gayarre, and Jesús Suárez The Influence of the Heat-Affected Zone Mechanical Properties on the Behaviour of the Welding in Transverse Plate-to-Tube Joints, Materials 2018, 11, 266.

AWS D1.1/D1.1M:2010 An American National Standard Structural Welding Code Steel. 22nd Edition.March 11, 2010

Cynthia L. Jenney Annette O’Brien Handbook.Ninth Edition. Volume 1.WELDING SCIENCE AND TECHNOLOGY. 2001 by American Welding Society

[A. Nait Salah, M. Kaddami.Effect of Filler Metal Diameter on Weld Joint of Carbon Steel SA516 Gr 70 and Filler Metal SFA 5.17 in Submerged Arc Welding SAW .international Journal of Chemical, Materials and Biomolecular Sciences. ISSN: 2415-6620.Vol:13, No:2, 2019

Downloads

Published

2020-07-08

How to Cite

A. NAIT SALAH, & M. KADDAMI. (2020). Composantes de joint de soudage par fusion. JOURNAL OF ADVANCES IN PHYSICS, 18, 9–14. https://doi.org/10.24297/jap.v18i.8780

Issue

Vol. 18 (2020)

Section

Articles

License

Copyright (c) 2020 A. NAIT SALAH, M. KADDAMI

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License All articles published in Journal of Advances in Linguistics are licensed under a Creative Commons Attribution 4.0 International License.