A CRITICAL REVIEW ON POLYURETHANE POLYMER HYBRID NANO COMPOSITES
DOI:
https://doi.org/10.24297/jac.v13i6.5700Keywords:
Polyurethane, X-ray diffraction, carbon nanotubes, nanoparticles.Abstract
Critical review on polyurethane hybrid nano composite paper gives knowledge on its techniques and their applications. In addition to the scientific framework for the advancement in the polymer matrix hybrid nano composite research, the critical review provides an ample discussion on technology, characterization, processing and its applications on polyurethane hybrid nano composites.Downloads
Download data is not yet available.
References
1. Cao, F & Jana, SC 2007, ‘Nanoclay-tethered shape memory polyurethane nanocomposites’, Polymer, vol. 48, pp. 3790-3800
2. Dorigato, A, Pegoretti, A & Penati, A 2011, ‘Effect of the polymer–filler interaction on the thermo-mechanical response of polyurethane–clay nanocomposites from blocked prepolymer’, Journal of Reinforced Plastics and Composites, vol. 30, no. 4, pp. 325–335.
3. Messori, M 2011, ‘In Situ Synthesis of Rubber Nanocomposites’, Recent Advances in Elastomeric Nanocomposites, Springer, pp. 57-85.
4. Mishra, AK, Rajamohanan, PR, Nando, GB & Chattopadhyay, S 2011, ‘Structure–property of thermoplastic polyurethane–clay nanocomposite based on covalent and dual-modified Laponite’, Advanced Science Letters, vol. 4, no. 1, pp. 65-73.
5. Mazurkiewicz, S & Porębska, R 2010, The methods of evaluation of mechanical properties of polymer matrix composites,ArchivesOf Foundry Engineering, vol. 3, pp. 209-212.
6. Khudyakov, IV, Zopf, RD & Turro, NJ 2009, ‘Polyurethane Nanocomposites’, Designed Monomers and Polymers, vol. 12, pp. 279–290.
7. Li, JH, Honga, RY, Li, MY, Li, HZ, Zheng, Y & Dinge, J 2009, ‘Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings’, Progress in Organic Coatings, vol. 64, pp. 504–509.
8. Joulazadeha, M & Navarchian, AH 2011, ‘Study on elastic modulus of crosslinked polyurethane/organoclay nanocomposites’, Polymers for Advanced Technologies, vol. 22, pp. 2022–2031
9. Rampf, M, Speck, O, Speck, T & Luchsinger, R H (2012), †Structural and mechanical properties of flexible polyurethane foams cured under pressure’. Journal of Cellular Plastics, vol. 48, no. 1, pp.53-69.
10. Song, HJ, Zhang, ZZ, Men, XH & Luo, ZZ 2010, ‘A study of the tribological behavior of nano-ZnO-filled polyurethane composite coatings’, Wear, vol. 269, pp. 79–85
11. Wacharawichanant, S, Thongbunyoung, N, Churdchoo, P & Sookjai, T 2010, ‘Effect of Zinc Oxide on the Morphology and Mechanical Properties of Poly(Styrene-co-Acrylonitrile)/Poly(Methyl Methacrylate)/Zinc Oxide Composites’, Science Journal Ubon Ratchathani University, vol. 1, no. 2, pp.21-26.
12. Morfologi, S & Mekanik, TD 2013, ‘Glass fiber and nanoclay reinforced polypropylene composites: Morphological, thermal and mechanical properties’, Sains Malaysiana, vol. 42, no. 4, pp. 537-546.
13. Saengsuwan, S & Saikrasun, S 2012, ‘Thermal stability of styrene-(ethylene butylene)-styrene-based elastomer composites modified by liquid crystalline polymer, clay, and carbon nanotube’, Journal of thermal analysis and calorimetry, vol. 110, no.3, pp. 1395-1406.
14. Bazhenov, S & Goncharuk, G 2013, ‘The Criterion of Particle-Induced Cracking of Filled Polymers’, Journal of Materials Science Research, vol. 3, no.1, pp. 77.
15. Atta, AM, El-Mahdy, GA & Al-Lohedan, HA 2013, ‘Corrosion Inhibition Efficiency of Modified Silver Nanoparticles for Carbon Steel in 1 M HCl’, International Journal of Electrochemical Science, vol. 8, pp. 4873 - 4885
16. Sharma, S, Vyas, R & Vijay, YK 2012, ‘A study on luminescence enhancement in ion irradiated TiO2/poly (methyl methacrylate) nanocomposites’, Advanced Materials Research, vol. 585, pp. 139-143.
17. Zhang, H, She, Y, Song, S, Chen, H & Pu, J 2012, ‘Improvements of mechanical properties and specular gloss of polyurethane by modified nanocrystalline cellulose’, Bio Resources, vol. 7, no. 4, pp. 5190-5199.
18. Eggersdorfer, ML 2012, Nanoparticle agglomerates and aggregates in aerosols by coagulation and sintering. PhD diss., Diss., Eidgenössische Technische Hochschule ETH Zürich, Nr.
19. Pan, H, Wang, X, Xiao, S, Yu, L & Zhang, Z 2013, ‘Preparation and characterization of TiO2 nanoparticles surface-modified by octadecyl trimethoxy silane’, Indian Journal of Engineering and Materials Sciences, vol. 20, pp. 561-567.
20. Mazrouaa, AM, Abed, MY, Mansour, NA & Mohamed, MG 2012, ‘Synthesis and characterization of poly o-anisidine nanoparticles and their nanocomposite’, Journal of Material Sciences & Engineering, vol. 1, no.103, pp. 2169-0022.
21. Hanemann, T & Szabó, DV 2010, ‘Polymer-Nanoparticle Composites: From Synthesis to Modern Applications’, Materials, vol. 3, pp. 3468-3517.
22. Jeon, IY & Baek JB 2010, ‘Nanocomposites Derived from Polymers and Inorganic Nanoparticles’, Materials, vol. 3, pp. 3654-3674
23. Sudheer, M, Madhyastha, NK, Amanna, MK, Jonthan, B & Jayaprakash, KM 2013, ‘Mechanical and abrasive wear behavior of metal sulphide lubricant filled epoxy composites’, ISRN Polymer Science.
24. Theiler, G, Hu¨bner, W, Gradt, T, Klein , P & Friedrich, K 2002, ‘Friction and wear of PTFE composites at cryogenic temperatures’,Tribology International, vol. 35, pp. 449–458.
25. Mello, D, Pezzin, SH & Amico, SC 2009, ‘The effect of post-consumer PET particles on the performance of flexible polyurethane foams’, Polymer Testing, vol. 28, pp. 702–708.
26. Iqbal, MZ, Mamoor, GM, Bashir, T, Irfan, MS & Manzoor, MB 2010, ‘A Study of Polystyrene-Metal Powder Conductive Composites’, Journal of Chemical Engineering, vol. 25, pp. 61-64.
27. Panigrahi, PK & Pathak, A 2013, ‘Aqueous Medium Synthesis Route for Randomly Stacked Molybdenum Disulfide’, Journal of Nanoparticles, Hindawi Publishing Corporation
28. Pradhan, KC & Nayak, PL 2012, ‘Synthesis and characterization of polyurethane nanocomposite from castor oil-hexamethylene diisocyanate (HMDI)’, Advances in Applied Science Research, vol. 3, no. 5, pp. 3045-3052.
29. Nuruzzaman, DM & Chowdhury, MA 2012, Friction and Wear of Polymer and Composites, INTECH Open Access Publisher.
30. Pettarin, V, Churruca, MJ, Felhos, D, Karger-Kocsis, J & Frontini, PM 2010, ‘Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles’, Wear, vol. 269, no. 1-2, pp. 31–45.
31. Luo, Y, Yu, XY, Dong, XM, Rong, MZ & Zhang, MQ 2010, ‘Effect of nano-Si3N4 surface treatment on the tribological performance of epoxy composite’, eXPRESS Polymer Letters, vol. 4, pp. 131-140.
32. Zhang, M & Singh. RP 2004, ‘Mechanical reinforcement of unsaturated polyester by Al2O3 nanoparticles’, Materials Letters, vol. 58, pp. 408– 412.
33. Paul, DR & Robeson, LM 2008, ‘Polymer nanotechnology: Nanocomposites’, Polymer, vol. 49, pp. 3187-3204.
34. Karim,A, Liu,DW, Douglas, JF, Nakatai, AI, Amis, EJ 2000, Polymer, Vol.41, pp. 8455-8458.
2. Dorigato, A, Pegoretti, A & Penati, A 2011, ‘Effect of the polymer–filler interaction on the thermo-mechanical response of polyurethane–clay nanocomposites from blocked prepolymer’, Journal of Reinforced Plastics and Composites, vol. 30, no. 4, pp. 325–335.
3. Messori, M 2011, ‘In Situ Synthesis of Rubber Nanocomposites’, Recent Advances in Elastomeric Nanocomposites, Springer, pp. 57-85.
4. Mishra, AK, Rajamohanan, PR, Nando, GB & Chattopadhyay, S 2011, ‘Structure–property of thermoplastic polyurethane–clay nanocomposite based on covalent and dual-modified Laponite’, Advanced Science Letters, vol. 4, no. 1, pp. 65-73.
5. Mazurkiewicz, S & Porębska, R 2010, The methods of evaluation of mechanical properties of polymer matrix composites,ArchivesOf Foundry Engineering, vol. 3, pp. 209-212.
6. Khudyakov, IV, Zopf, RD & Turro, NJ 2009, ‘Polyurethane Nanocomposites’, Designed Monomers and Polymers, vol. 12, pp. 279–290.
7. Li, JH, Honga, RY, Li, MY, Li, HZ, Zheng, Y & Dinge, J 2009, ‘Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings’, Progress in Organic Coatings, vol. 64, pp. 504–509.
8. Joulazadeha, M & Navarchian, AH 2011, ‘Study on elastic modulus of crosslinked polyurethane/organoclay nanocomposites’, Polymers for Advanced Technologies, vol. 22, pp. 2022–2031
9. Rampf, M, Speck, O, Speck, T & Luchsinger, R H (2012), †Structural and mechanical properties of flexible polyurethane foams cured under pressure’. Journal of Cellular Plastics, vol. 48, no. 1, pp.53-69.
10. Song, HJ, Zhang, ZZ, Men, XH & Luo, ZZ 2010, ‘A study of the tribological behavior of nano-ZnO-filled polyurethane composite coatings’, Wear, vol. 269, pp. 79–85
11. Wacharawichanant, S, Thongbunyoung, N, Churdchoo, P & Sookjai, T 2010, ‘Effect of Zinc Oxide on the Morphology and Mechanical Properties of Poly(Styrene-co-Acrylonitrile)/Poly(Methyl Methacrylate)/Zinc Oxide Composites’, Science Journal Ubon Ratchathani University, vol. 1, no. 2, pp.21-26.
12. Morfologi, S & Mekanik, TD 2013, ‘Glass fiber and nanoclay reinforced polypropylene composites: Morphological, thermal and mechanical properties’, Sains Malaysiana, vol. 42, no. 4, pp. 537-546.
13. Saengsuwan, S & Saikrasun, S 2012, ‘Thermal stability of styrene-(ethylene butylene)-styrene-based elastomer composites modified by liquid crystalline polymer, clay, and carbon nanotube’, Journal of thermal analysis and calorimetry, vol. 110, no.3, pp. 1395-1406.
14. Bazhenov, S & Goncharuk, G 2013, ‘The Criterion of Particle-Induced Cracking of Filled Polymers’, Journal of Materials Science Research, vol. 3, no.1, pp. 77.
15. Atta, AM, El-Mahdy, GA & Al-Lohedan, HA 2013, ‘Corrosion Inhibition Efficiency of Modified Silver Nanoparticles for Carbon Steel in 1 M HCl’, International Journal of Electrochemical Science, vol. 8, pp. 4873 - 4885
16. Sharma, S, Vyas, R & Vijay, YK 2012, ‘A study on luminescence enhancement in ion irradiated TiO2/poly (methyl methacrylate) nanocomposites’, Advanced Materials Research, vol. 585, pp. 139-143.
17. Zhang, H, She, Y, Song, S, Chen, H & Pu, J 2012, ‘Improvements of mechanical properties and specular gloss of polyurethane by modified nanocrystalline cellulose’, Bio Resources, vol. 7, no. 4, pp. 5190-5199.
18. Eggersdorfer, ML 2012, Nanoparticle agglomerates and aggregates in aerosols by coagulation and sintering. PhD diss., Diss., Eidgenössische Technische Hochschule ETH Zürich, Nr.
19. Pan, H, Wang, X, Xiao, S, Yu, L & Zhang, Z 2013, ‘Preparation and characterization of TiO2 nanoparticles surface-modified by octadecyl trimethoxy silane’, Indian Journal of Engineering and Materials Sciences, vol. 20, pp. 561-567.
20. Mazrouaa, AM, Abed, MY, Mansour, NA & Mohamed, MG 2012, ‘Synthesis and characterization of poly o-anisidine nanoparticles and their nanocomposite’, Journal of Material Sciences & Engineering, vol. 1, no.103, pp. 2169-0022.
21. Hanemann, T & Szabó, DV 2010, ‘Polymer-Nanoparticle Composites: From Synthesis to Modern Applications’, Materials, vol. 3, pp. 3468-3517.
22. Jeon, IY & Baek JB 2010, ‘Nanocomposites Derived from Polymers and Inorganic Nanoparticles’, Materials, vol. 3, pp. 3654-3674
23. Sudheer, M, Madhyastha, NK, Amanna, MK, Jonthan, B & Jayaprakash, KM 2013, ‘Mechanical and abrasive wear behavior of metal sulphide lubricant filled epoxy composites’, ISRN Polymer Science.
24. Theiler, G, Hu¨bner, W, Gradt, T, Klein , P & Friedrich, K 2002, ‘Friction and wear of PTFE composites at cryogenic temperatures’,Tribology International, vol. 35, pp. 449–458.
25. Mello, D, Pezzin, SH & Amico, SC 2009, ‘The effect of post-consumer PET particles on the performance of flexible polyurethane foams’, Polymer Testing, vol. 28, pp. 702–708.
26. Iqbal, MZ, Mamoor, GM, Bashir, T, Irfan, MS & Manzoor, MB 2010, ‘A Study of Polystyrene-Metal Powder Conductive Composites’, Journal of Chemical Engineering, vol. 25, pp. 61-64.
27. Panigrahi, PK & Pathak, A 2013, ‘Aqueous Medium Synthesis Route for Randomly Stacked Molybdenum Disulfide’, Journal of Nanoparticles, Hindawi Publishing Corporation
28. Pradhan, KC & Nayak, PL 2012, ‘Synthesis and characterization of polyurethane nanocomposite from castor oil-hexamethylene diisocyanate (HMDI)’, Advances in Applied Science Research, vol. 3, no. 5, pp. 3045-3052.
29. Nuruzzaman, DM & Chowdhury, MA 2012, Friction and Wear of Polymer and Composites, INTECH Open Access Publisher.
30. Pettarin, V, Churruca, MJ, Felhos, D, Karger-Kocsis, J & Frontini, PM 2010, ‘Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles’, Wear, vol. 269, no. 1-2, pp. 31–45.
31. Luo, Y, Yu, XY, Dong, XM, Rong, MZ & Zhang, MQ 2010, ‘Effect of nano-Si3N4 surface treatment on the tribological performance of epoxy composite’, eXPRESS Polymer Letters, vol. 4, pp. 131-140.
32. Zhang, M & Singh. RP 2004, ‘Mechanical reinforcement of unsaturated polyester by Al2O3 nanoparticles’, Materials Letters, vol. 58, pp. 408– 412.
33. Paul, DR & Robeson, LM 2008, ‘Polymer nanotechnology: Nanocomposites’, Polymer, vol. 49, pp. 3187-3204.
34. Karim,A, Liu,DW, Douglas, JF, Nakatai, AI, Amis, EJ 2000, Polymer, Vol.41, pp. 8455-8458.
Downloads
Published
2017-02-10
How to Cite
Anbazhagan, R., Rajamani, G., Arumugam, K., Sathiyamoorthy, V., & Suresh, R. (2017). A CRITICAL REVIEW ON POLYURETHANE POLYMER HYBRID NANO COMPOSITES. JOURNAL OF ADVANCES IN CHEMISTRY, 13(6), 6236–6242. https://doi.org/10.24297/jac.v13i6.5700
Issue
Section
Articles
License
All articles published in Journal of Advances in Linguistics are licensed under a Creative Commons Attribution 4.0 International License.
