TiO2- CuI Nanoparticle /Ru Solid State Dye-Sensitize Solar Cells
DOI:
https://doi.org/10.24297/jac.v12i15.4079Keywords:
Pulsed laser deposition, TiO2 thin films, Copper Iodide thin film, Silver, Solar CellAbstract
In this work solid state dye sensitized solar cell (SSDSSC) type  (ITO / TiO2/ Ru / CuI / Ag) is fabricated. The thin films are prepared by pulse laser deposition (PLD) technique under the vacuum pressure of 3×10−3 mbar and annelid at 450 oC. In this technique Nd:YAG laser at 1064 nm wavelength with (200 , 500 , 800) pulsed was used. It was noticed from (I-V) characteristics of the solar cell that  the photocurrent collected from the TiO2 (NP) is increase as the number of  laser pulses increase. The conversion efficiency of TiO2 is increased  from 2.115% up to 5.654% and for CuI from 1.73 % to 5.19 % when the number of pulses increase from 200 up to 800.Downloads
Download data is not yet available.
Downloads
Published
2015-12-12
How to Cite
taha, samar, Al-Dabag, S. Y., Ahmed, S. S., & Taher, W. J. (2015). TiO2- CuI Nanoparticle /Ru Solid State Dye-Sensitize Solar Cells. JOURNAL OF ADVANCES IN CHEMISTRY, 12(15), 4785–4791. https://doi.org/10.24297/jac.v12i15.4079
Issue
Section
Articles
License
All articles published in Journal of Advances in Linguistics are licensed under a Creative Commons Attribution 4.0 International License.